n Transient Immunity  Pulse 1 - A simulation of transients due to supply disconnection from inductive loads; it applies to a DUT if as used in the vehicle, it remains connected directly in parallel with an inductive load
 Pulse 2a - Simulates transients due to sudden interruption of currents in a device connected in parallel with the DUT due to the inductances of the wiring harness
 Pulse 2b - Simulates transients from dc motors acting as generators after the ignition is switched off
 Pulse 3a/3b - Occurs as the result of switching processes. The characteristics of this pulse are influenced by distributed capacitance and inductance of the wiring harness
 Pulse 4 - The voltage reduction caused by energizing the starter motor circuits of the internal combustion
 Pulse 4 Variants – Most manufacturer variations of pulse four are generally much more complicated. For example Ford requires up to four arbitrary generators with four outputs to be perfectly synchronized
 Pulse 5 – Simulation of a load dump transient occurring in the event of a discharged battery being disconnected while the alternator is generating charging current with other loads remaining on the alternator circuit at this moment
 Magnetic Field Immunity – Simulates magnetic fields generated by electric motors, daytime running lamps, etc. for DUTs with magnetically sensitive devices.
 Transformer Coupled Sine Waves – Sinusoidal noise burst coupled on battery lines
| 
